GRUMBACHER M INC -- HYGEL ACRYLIC TRANSPARENTIZING MEDIUM  -- 8010-00F031007
<pre>=====================  Product Identification  =====================

Product ID:HYGEL ACRYLIC TRANSPARENTIZING MEDIUM
MSDS Date:11/08/1990
FSC:8010
NIIN:00F031007
=== Responsible Party ===
Company Name:GRUMBACHER M INC
Address:30 ENGELHARD DR
City:CRANBURY
State:NJ
ZIP:08512
Country:US
Info Phone Num:609-655-8282
Emergency Phone Num:609-655-8282
CAGE:72925
=== Contractor Identification ===
Company Name:GRUMBACHER M INC
Address:30 ENGELHARD DR
Box:City:CRANBURY
State:NJ
ZIP:08512
Country:US
Phone:609-655-8282
CAGE:72925

=============  Composition/Information on Ingredients  =============

Ingred Name:GIV-GARD DXN
Fraction by Wt: 0.01%

Ingred Name:AMMONIA, AMMONIUM HYDROXIDE-ANHYDROUS, ANHYDROUS AMMONIA
CAS:7664-41-7
RTECS #:BO0875000
Fraction by Wt: 0.9%
Other REC Limits:25 PPM
OSHA PEL:35 MG/CUM
ACGIH TLV:17 MG/CUM
EPA Rpt Qty:100 LBS
DOT Rpt Qty:100 LBS

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:ORAL LD50 (RATS): 1.9 ML/KG (SEE SUPP)
Routes of Entry: Inhalation:NO	Skin:NO  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:SKIN & EYE IRRITATION.
Explanation of Carcinogenicity:NONE

=======================  First Aid Measures  =======================

First Aid:INGESTION: CONSULT PHYSICIAN AFTER INDUCING VOMITING. OBTAIN
    MEDICAL ATTENTION IN ALL CASES.

=====================  Fire Fighting Measures  =====================

Flash Point:NON-FLAMMABLE

==================  Accidental Release Measures  ==================

Spill Release Procedures:MOP UP W/WARM SOAPY WATER & DISPOSE.

=============  Exposure Controls/Personal Protection  =============

Supplemental Safety and Health
LD50 INFORMATION IS FOR GOV-GARD DXN.

==================  Physical/Chemical Properties  ==================

Vapor Density:>1
Evaporation Rate &amp; Reference:SLOWER THAN BU AC

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:EXCESS HEAT OR COLD

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE, &
    FEDERAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.